| Customization: | Available |
|---|---|
| Application: | Textile Recycling |
| Automatic Grade: | Semi-Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Description of Cotton Fabric Yarn Waste Recycling Machine For Felt Making
Recycle kinds of textile waste ( cotton fabric polyester , knitting hosiery fabric ,denim waste, hard waste tread yarn , clothing and garment rags) get the fiber from these waste enable to use for felt making and other textile business purpose , make good use of waste material save cost make benefit , normally use in spinning mills garment mills weaving mills cotton mills non-woven mills and fabric cotton waste processing mills .
2.Main technical of Cotton Fabric Yarn Waste Recycling Machine For Felt Making
| NO | ITEM | DESCRIPTION |
| 1 | Model And full name |
RD6554 Environmental High configuration Waste fabric recycling machinery |
| 2 | Dimension of M/C | 1840/4300/14300 |
| 3 | Weight | 6100kg |
| 4 | Total power | 110kw |
| 5 | Main motor | 30KW for 1st unit/22KW for 2nd unit/18.5KW for 3rd to 4th units |
| 6 | Way of starting | Y-△ |
| 7 | Protection | Main motor overload protection |
| 8 | Working width | 1020mm/ unadjustable |
| 9 | Diameter of main rollers | Ø600mm-500mm-500mm-400mm |
| 10 | Roller speed/consumables | Ø600:1000-1450r/min-U type pins Ø500:1000-1500r/min-Teeth wire Ø400:1700-2100r/min-Teeth wire |
| 11 | Electrical control cabinet | According to certain procedures to start and stop main motors and fans, including the emergency stop.and has general protection. |
| 12 | Chute Feeder Cone dust collector |
Provide transmit power by 4.0 kw fan, and with sensors to control feeding speed, realize the set production. The dust is collected to conical dust collector |
| 13 | Output | 400-500kg/h |
| 14 | Note | 1:Target production 400-500kg per hour, based on the existing raw materials, chemical fiber, textile waste, and after preliminary processing of old clothes) hard things are not allowed to be contained in the raw materials 2: Achieve target output and continuous trouble-free work, must be based on following the right operation method. |
3.Features of Cotton Fabric Yarn Waste Recycling Machine For Felt Making
Mainly release fiber, cotton, textile material, such as through tear at the tangle of large fiber loose solution into small pieces or beam, at the same time accompanied by blending in the process of release, in addition to the complex role.Opening machine is usually consists of a pair feeding roller or feed roller and an opening of cylinder, the opening Angle of nails or mounted on the cylinder or comb needle cloth or porcupine goons, for opening more completely, some still in work roll and strip roller mounted on the cylinder.Different structure makes its opening effect, mixing effect, the effect of removing impurity have obvious differences, so on the different requirements of the production line should adopt different forms of opening machine.Also can according to the processing of materials to choose opening machine, comb again after the opening of fiber feeding machine for processing.
If material legth more than 30cm, then advice use the cutting machine first:
then use the textile waste recycling line: GM600+ GM600+GM500+GM400
){kind=link}